For Homeowners
Your kitchen ice maker quit and you need ice for daily use. We replace it with a unit that fits your cabinet and water line.
- Undercounter unit leaking
- Fridge ice maker dead
- Noisy grinding at night
Ice Maker Replacement Naples FL: Cold Ice, Zero Downtime
When your ice maker quits, you need Ice Maker Replacement Naples FL that gets ice flowing again fast. We replace failed units in kitchens, bars, and restaurants from Old Naples to Vanderbilt Beach. Whether it's a Whirlpool undercounter model or a Manitowoc commercial head, our techs diagnose the failure, match the right replacement, and install it the same day. No guesswork, no waiting weeks for parts.
Test water pressureCheck inlet valveVerify ice output- We measure firstCabinet opening checked before ordering
- We protect floorsDrop cloths and shoe covers used
- We test cyclesIce drops before we leave
- We explain filtersShow you how to change it
What's Included in Ice Maker Replacement
Every replacement job is different, but here's what we bring to the table. We handle the heavy lifting, the connections, and the cleanup. You just point to the old machine and we'll take it from there.
Removal and Disposal
We disconnect the old unit, shut off the water, and haul it away. No need to rent a dolly or pay a hauling fee. We recycle the refrigerant per EPA Section 608 rules.
New Water Line Tubing
Old tubing gets brittle and cracks. We install fresh water line tubing with new compression fittings. This prevents the leaks that killed your last machine.
Ice Maker Water Filter
A new filter comes with every install. It protects the inlet valve and keeps your ice tasting clean. We'll show you how to change it and set a reminder for the next one.
Drain Pump Check
We verify the drain pump and drain line are clear and properly sloped. A clogged drain is a common cause of standing water and mold in Naples humidity.
Full Cycle Test
We run the machine through a complete harvest cycle. You'll see ice drop into the bin before we pack up. If anything's off, we fix it on the spot.
Walkthrough and Tips
We show you how to clean the condenser coil, check for leaks, and reset error codes. Five minutes of knowledge saves you a service call later.
Homes and businesses.
The approach is the same for a home and a business. What changes is the access, the schedule and who needs the paperwork.
For Businesses
Your bar or restaurant ice machine failed and you need it back fast. We source and install commercial heads with minimal downtime.
- Bar ice bin empty
- Hotel ice machine down
- Health inspection soon
What Ice Maker Replacement Naples FL Actually Involves
A plain-language look at what Ice Maker Replacement involves and when it is needed.
See how it worksIce Maker Replacement Naples FL is the removal of a failed ice maker and the installation of a new or refurbished unit that matches your space, water supply, and production needs. It's not just swapping a box. We check the water inlet valve, test the compressor, inspect the condenser coil, and verify the control board before we recommend replacement over repair. If the auger motor is seized or the mold is cracked, replacement usually costs less than chasing parts on a 10-year-old machine.
In Naples, ice makers work harder than almost anywhere in Florida. The combination of 90-degree summers, humid air, and hard water pushes compressors and water lines to fail early. We see clogged water lines in Pelican Bay condos and thermostat malfunctions in Golden Gate rentals every week. If your unit is leaking water or making noise that sounds like gravel in a blender, call us before the compressor burns out. A new ice machine replacement in Naples FL often pays for itself in avoided repair bills within two years.
Replacing a failed ice maker is often cheaper than a second repair.
- What it is
- Removing a failed ice maker and installing a new or refurbished unit that matches your space.
- When you need it
- When repairs exceed half the cost of new, or the machine is over 10 years old.
- What to expect
- A diagnosis, a written quote, and installation in two to six hours depending on type.
Our Ice Maker Replacement Process
We keep it simple: diagnose, quote, replace, test. No mystery fees, no waiting around. Here's exactly what happens when you book Ice Maker Replacement Naples FL with us.
-
Phone Triage
Call us at +12393129157 and describe what's happening. Is it leaking, not making ice, or making noise? We ask for the brand and model if you have it. Most calls take five minutes, and we can often tell you whether it's a repair or replacement before we arrive.
- Phone triage
- Brand check
- Symptom review
-
On-Site Diagnosis
A tech arrives in a marked van with a multimeter, manifold gauge set, and leak detector. We test the compressor, check the water inlet valve, and pull any error codes. You get a written quote on the spot: repair cost versus replacement cost, with no pressure either way.
- On-site test
- Compressor check
- Written quote
-
Replacement Sourcing
If replacement is the call, we source the unit. We stock common sizes for Whirlpool, GE, and Frigidaire undercounter models. For Scotsman, Hoshizaki, or Ice-O-Matic commercial heads, we can usually get next-day delivery in Collier County. You approve the model and price before we order.
- Source unit
- Approve model
- Schedule install
-
Removal and Install
We shut off the water, disconnect the old unit, and haul it away. Then we set the new machine, connect the water line tubing, install a fresh ice maker water filter, and check the drain pump. Most residential swaps take two to three hours. Commercial installs run four to six.
- Remove old
- Install new
- Connect lines
-
Test and Walkthrough
We run the machine through a full cycle, check ice production, and verify there are no leaks at the inlet valve or drain. You get a walkthrough on filter changes and cleaning intervals. We don't leave until the bin is filling and the floor is dry.
- Cycle test
- Leak check
- Walkthrough
Tools and Methods We Use
Move across a circle, or focus it and press Enter, for an illustrative thermal view of the photograph.
Multimeter
Tests control boards, thermostats, and sensors for continuity and voltage. Essential for diagnosing electrical faults without guesswork.
Manifold gauge set
Reads refrigerant pressures on the compressor. Tells us if the system is low or the compressor is failing.
Vacuum pump
Pulls a vacuum on the refrigerant lines before charging. Removes moisture that would freeze and block the capillary tube.
Refrigerant recovery machine
Recovers refrigerant per EPA Section 608 before we open the system. Required by law and good for the environment.
Leak detector
Finds refrigerant leaks at joints and valves. We use electronic and bubble solutions to confirm.
Thermal views are illustrative, generated from the photographs.
Methods
Flaring tool
Makes clean flares on copper tubing for leak-free connections. A bad flare is a common cause of slow leaks.
Fin comb
Straightens bent condenser fins so air flows freely. A dirty, bent coil makes the compressor overheat.
EPA Section 608 recovery and charging
We recover all refrigerant before repair or replacement, then weigh in the exact charge. This is federal law and protects the compressor.
AHRI-matched component replacement
When we replace a compressor or control board, we match it to the manufacturer's specs. This keeps the system efficient and avoids callbacks.
NATE-certified electrical diagnostics
Our techs follow NATE standards for testing control boards and sensors. We don't guess; we measure and confirm.
Manufacturer service certification procedures
For Scotsman, Manitowoc, and Hoshizaki, we follow factory service manuals.
When to Call for Ice Maker Replacement
Leaking Whirlpool
We compare the repair cost to a new unit. We source a matching size and install it the same day.
Outcome: The old unit is hauled away.
Bar Manitowoc down
Your restaurant's Manitowoc head stopped producing ice during dinner rush.
We offer emergency commercial replacement. We diagnose the failure, source a replacement overnight, and install it before the next service. We work around your hours.
Outcome: Your ice bin is full by lunch. No lost sales, no health code violations.
Musty rental ice
You just bought a vacation rental in Lely Resort and the ice maker smells musty.
We inspect the unit, clean and sanitize the bin and lines, and replace the water filter. If the mold is in the auger or mold, we recommend replacement.
Outcome: Guests get clean ice and you avoid bad reviews. We set up a maintenance schedule.
GE fridge quit
Your GE refrigerator ice maker quit and the freezer is still cold.
We test the water inlet valve and control board. Often it's a clogged water line or a failed valve. We repair it, or replace the ice maker module if parts are obsolete.
Outcome: Ice is back in 24 hours. You avoid buying a new refrigerator.
Sub-Zero grinding
Your Sub-Zero built-in ice maker is making loud grinding noises.
We inspect the auger motor and crusher blade. If the motor is seized, we replace it. If the mold is cracked, we quote a replacement unit that fits the cabinet.
Outcome: The noise stops. Your Sub-Zero keeps its custom look with a new ice maker inside.
How Ice Maker Replacement Runs in Naples
Naples is hard on ice makers. The summer heat and humidity mean compressors run longer, and the hard water clogs inlet valves and filters faster than in cooler climates. We see a spike in emergency ice maker replacement Naples Florida calls from June through September, especially in high-rise condos where the machine is tucked into a hot cabinet.
In older homes in Old Naples and Coquina Sands, we often find copper water lines that need updating to PEX or braided tubing. We also work with property managers in Pelican Bay and Vanderbilt Beach who need fast turnarounds between guests. If you're searching for new ice machine replacement near me Naples, we're local and we stock common units.
We know the Collier County code requirements for drain lines and backflow prevention, so your install passes inspection the first time.
- Pelican Bay: High-rise condos with tight cabinet spaces. We measure carefully and often use undercounter units with front venting.
- Old Naples: Historic homes with older plumbing. We frequently upgrade water line tubing and shutoff valves during replacement.
- Golden Gate: Many rental properties with hard water. We recommend a water filter and annual condenser cleaning to extend life.
- Vanderbilt Beach: Beachfront units see salt air corrosion. We check electrical connections and replace corroded valves.
- Lely Resort: Vacation rentals need quick turnarounds. We coordinate with cleaners and leave the unit ready for guests.
- Year-round high humidity: Condenser coils clog with dust and mold faster. We clean coils during every replacement and recommend annual service.
We walk through the symptoms and check the machine. We protect your floor and set up tools. We test a full cycle and explain filter changes.
From problem to finished result.
Leaking Whirlpool in Pelican Bay
Before: A 14-year-old Whirlpool undercounter ice maker was leaking water onto the hardwood floor. The inlet valve was cracked and the water line was brittle. The homeowner was using towels to catch the drips.
After: We replaced the unit with a new Whirlpool model that fit the same cabinet. Installed new braided water line tubing, a fresh filter, and tested a full cycle. The floor is dry and the bin fills in 45 minutes.
Change the water filter every six months. Clean the condenser coil annually. Check the inlet valve for drips each spring.
Manitowoc Down at Fifth Avenue Bar
Before: A Manitowoc commercial head stopped producing ice on a Friday. The compressor was pulling high amps and the condenser coil was packed with lint. The bar was buying bagged ice for the weekend.
After: We sourced a replacement Manitowoc head overnight and installed it Saturday morning. We cleaned the new condenser, checked the drain pump, and ran three cycles. The bin was full by noon.
Clean the condenser coil every three months. Replace the water filter every four months. Schedule annual compressor checks.
Smelly Ice Maker in Lely Resort Rental
Before: A vacation rental's GE ice maker was producing musty-smelling ice. The bin had pink mold and the water filter was two years old. Guests had complained twice.
After: We replaced the ice maker module and installed a new filter. We cleaned and sanitized the bin, auger, and water lines. The ice is clear and odor-free. The owner set up a maintenance plan.
Sanitize the bin every six months. Change the filter every six months. Run a cleaning cycle before each rental season.
Ice Maker Problems We Solve in Naples
Most ice maker failures start small and get expensive. Here are the problems we see every week in Collier County and how we fix them before they cost you a new floor or a health inspection.
- Leaking waterIce maker leaking water onto the floorWater damages cabinets, warps flooring, and can grow mold in 24 hours. In a condo, it can leak into the unit below. We trace the leak to the faulty water inlet valve or cracked water line tubing. We replace the valve, install new tubing, and dry the area. If the machine is old, we quote replacement versus repair.
- No ice at allIce maker not making ice at allNo ice means unhappy guests and emergency store runs. For a bar, it means lost sales on every cocktail. We test the thermostat, water inlet valve, and control board. Often it's a clogged water line or a defective control board. We repair if it makes sense, or replace the unit with a properly sized model.
- Noisy augerIce maker noisy operation or auger jamGrinding and banging means the auger motor or crusher blade is failing. Ignore it and you'll burn out the motor. We clear the auger jam, inspect the crusher blade, and replace the auger motor if it's seized. We also check the ice bin for cracks that let ice jam the mechanism.
- Dispenser deadIce maker dispenser not workingYou press the lever and nothing happens. It's usually a control board or a jammed auger. This is a common complaint in French-door refrigerators. We diagnose the dispenser circuit, test the control board, and clear any auger jam. If the board is dead, we replace it. Most dispenser repairs are done in one visit.
- Error codesIce maker error codes flashingError codes mean the machine is locked out. You can't reset it without knowing what failed. Ignoring it leads to compressor failure. We pull the code, test the sensor or control board, and replace the failed part. We clear the error and run a full cycle to confirm. Diagnosis fee is waived if you approve the repair.
Why Replace Instead of Repair
A new ice maker means clean ice, no leaks, and no repair bills.
Stop the Leak Cycle
Leaking water lines and faulty inlet valves are the top reason we get called to Naples homes. A new unit comes with fresh tubing and a factory-sealed valve, so you're not patching a 12-year-old connection that's one freeze away from flooding your floor again.
Cut Energy Bills
Old ice makers can pull 20% more power than a modern Energy Star unit. In a Naples summer, that adds up fast. We size the replacement to your actual daily ice demand, so you're not running a commercial-grade machine to fill two tumblers a day.
End the Repair Merry-Go-Round
If you've paid for two or more repairs in the last 18 months, replacement is the cheaper path.
Get the Right Size the First Time
Most failed units were undersized or oversized from day one. We measure your cabinet opening, check the drain pump capacity, and confirm the water filter setup before ordering. That's how you avoid a machine that freezes up in August or can't keep up with happy hour.
What a written scope covers.
What a written scope covers and what shapes it. Prices are set by the business after the first look.
Included
- Removal and disposal of old unit
- New water line tubing installed
- New ice maker water filter
- Drain pump and drain line check
- Full harvest cycle test
- Walkthrough on filter changes
Depends on
- Cabinet size and modification needs
- Water line condition and shutoff valve
- Drain pump versus gravity drain
- Residential or commercial machine type
- After-hours or emergency dispatch
- Brand and model availability
What you receive
Clear records you can keep and share.
Quote
Written price before work starts
Install log
Model and serial recorded
Filter note
Next change date written
Test record
Cycle and leak check documented
Ice Maker Expertise You Can Verify
We've worked on everything from Sub-Zero built-ins in Port Royal to Manitowoc heads in Fifth Avenue South bars. When we say we know ice makers, it's because we've torn down and rebuilt hundreds of them across Collier County.
Factory-trained on Scotsman, Manitowoc, and Hoshizaki commercial ice machines.
We carry flaring tools and torque wrenches to make leak-free water line connections.
What we work with
- Water filter
- Inlet valve
- Ice mold
- Auger motor
- Thermostat
- Control board
- Compressor
- Drain pump
Service ZIP codes.
A list like this tells people straight away whether you cover their street. Not listed? Call and ask: it only takes a minute.
- 34103
- 34102
- 34101
- 34105
- 34104
- 34106
Towns we serve.
Based in naples and covering the places around it. Pick one for local details.
- Downtown Naples
- Old Naples
- Park Shore
- Moorings
- Coquina Sands
- Naples Park
- Pelican Bay
- North Naples
- East Naples
- Golden Gate
- Lely Resort
- Naples Manor
What Naples Customers Say
Frequently Asked Questions About Ice Maker Replacement
The quote includes removal, new tubing, and a filter. We give you the exact number before we order anything.
We do. IceTech Repair Experts handles ice maker replacement for homes and businesses across Collier County. Call +12393129157 and we'll schedule a diagnosis or same-day swap if you already know the model you want.
Yes, for common residential models. If you call before noon and your unit is a Whirlpool, GE, or Frigidaire undercounter size, we can often install the same day. Commercial machines usually need next-day sourcing. We'll tell you honestly on the phone what's possible.
We replace Scotsman, Manitowoc, Hoshizaki, and Ice-O-Matic commercial heads for restaurants, bars, and hotels. We handle the removal, install, and initial cleaning. For walk-in units, we coordinate with your plumber if a drain line needs modification. Most commercial swaps take four to six hours.
Related Ice Maker Services
Other services from the same team.
- Ice Maker MaintenanceA yearly tune-up keeps ice tasting clean and prevents mid-summer breakdowns. We descale the mold, clean the condenser coil and test the water inlet valve. Commercial clients in Collier County schedule maintenance twice a year to avoid downtime.
- Ice Maker Cleaning and SanitizingSlime, scale and odor come from biofilm inside the water path. We pull the mold and bin, scrub with food-safe sanitizer, and flush the water line tubing. This service is popular with bars and cafes along Fifth Avenue South.
- Ice Maker Water Line RepairA cracked or clogged water line is one of the most common causes of no ice. We trace the line from the shutoff valve to the inlet, replace damaged tubing and check for kinks. Most line repairs in naples take under 90 minutes.
Get Your Ice Maker Replacement Naples FL Quote Today
Don't let a dead ice maker ruin your weekend. Call IceTech Repair Experts at +12393129157 for a free phone estimate. We'll tell you if replacement is the right call and schedule a same-day visit if you're in Collier County.
Contact IceTech Repair Experts
Call +12393129157 or email [email protected] to book your ice maker repair. Our dispatch team answers calls from 8 a.m. to 6 p.m. Tell us your brand, symptom and ZIP code, and we will give you a realistic arrival window.