For your home
We fix fridge and undercounter ice makers in Naples homes. You get a clear price before we start and a clean kitchen when we leave.
- Fridge ice maker not making ice
- Water under the machine
- Grinding or loud noise
Ice Machine Repair Naples FL done right the first time
When your ice machine quits, we get it making ice again. Ice Machine Repair Naples FL means a local tech at your door with the right parts for Scotsman, Manitowoc, Hoshizaki, and Samsung units. We handle ice maker repair in Naples FL for restaurants, hotels, and homeowners from Pelican Bay to Port Royal. Call +12393129157 and we will diagnose it today.
Test water pressureCheck inlet valveRun harvest cycle- We test firstNo parts swapped on a guess.
- We show the partYou see what failed.
- We clean upFloor protected, area wiped.
- We test againTwo cycles before we leave.
What is included in Ice Machine Repair Naples FL
Every repair call includes a full diagnostic, the failed part, labor, and a test cycle before we leave. We do not charge extra to pull the machine out or to put it back. Parts we do not stock are quoted separately with a clear lead time. Here is what you get.
Full diagnostic
We test water pressure, the water inlet valve, the thermostat, the control board, and the condenser coil. You get a plain explanation of what failed and why, plus a written price for the fix before we start.
Failed part replacement
The quoted price covers the replacement part and the labor to install it. We use manufacturer-spec parts for Whirlpool, GE, Samsung, LG, Scotsman, Manitowoc, and Hoshizaki machines.
Sealed-system service
If the compressor or refrigerant circuit is the problem, we recover, evacuate, and recharge to spec under EPA Section 608. That work is quoted separately because it takes longer and uses refrigerant.
Harvest cycle test
We run at least two full harvest cycles and watch the first ice drop. If the machine is not making ice when we pack up, the job is not finished. You see it working before we leave.
Cleanup and walkthrough
We protect the floor, wipe down the area, and put the machine back. The tech walks you through what was replaced and gives you one maintenance tip to prevent a repeat call.
Water filter check
We inspect the ice maker water filter on every call. If it is due, we can swap it on the spot. A fresh filter protects the water inlet valve and keeps your ice tasting clean.
Homes and businesses.
The approach is the same for a home and a business. What changes is the access, the schedule and who needs the paperwork.
For your business
We keep restaurant, hotel, and bar ice machines running through season. Commercial calls get priority scheduling and we stock the parts that fail most.
- Empty bin during service
- Error code on display
- Leak under the machine
Ice Machine Repair Naples FL: what the job actually involves
A plain-language look at what Ice Machine Repair involves and when it is needed.
See how it worksIce Machine Repair Naples FL is the diagnosis and correction of any fault that stops an ice maker from producing, harvesting, or dispensing ice. That covers a clogged water line, a faulty water inlet valve, a defective control board, a thermostat malfunction, or a compressor that will not start. We test the refrigeration circuit with a manifold gauge set, check voltage at the board with a multimeter, and trace water flow from the shutoff valve to the ice maker mold. Most no-ice calls trace back to one of four parts, and we carry them on the truck.
In Naples, the heat and humidity push ice makers harder than almost anywhere in Florida. A machine that runs 18 hours a day in a beachfront restaurant or a garage bar in North Naples will scale up its condenser coil and burn through a water filter faster than the manual predicts. If you searched for ice machine repair in Naples FL near me at 9 p.m. on a Friday, you are not alone. We run emergency ice machine repair Naples Florida calls seven days a week because warm ice bins cost restaurants money and homeowners a spoiled weekend.
Most ice machine failures trace to one of four parts, and we carry them on the truck.
- What it is
- Diagnosis and repair of any fault that stops an ice maker from producing or dispensing ice.
- When you need it
- When the bin is empty, water is on the floor, or the machine is noisy or showing a code.
- What to expect
- A diagnostic, a written price, the repair, and two test cycles before we leave.
What to expect on a repair call
From the first ring to the final ice drop, here is how an Ice Machine Repair Naples FL visit runs. No mystery, no waiting around for a callback that never comes.
-
Phone triage
We ask for the brand, model, and what the machine is doing. Error code on the display? No ice but the bin is cold? Water on the floor? That five-minute call lets us load the right parts and often tells us whether this is a 45-minute fix or a two-hour job. You get a window, not a vague all-day promise.
- Model
- Symptom
- Window
-
On-site diagnosis
The tech walks your space, protects the floor, and pulls the machine out. We check incoming water pressure, test the water inlet valve, read voltage at the control board with a multimeter, and inspect the condenser coil. You get a plain-English explanation of what failed and why before any wrench turns.
- Inspect
- Test
- Explain
-
Upfront pricing
We quote the repair in writing before we start. The price covers the part, the labor, and the test cycle. If we find a second problem mid-repair, we stop and tell you. You approve it or we button the machine back up. No surprise line items on the invoice.
- Quote
- Approve
- Start
-
Repair and test
We replace the failed component, evacuate and recharge the sealed system if needed, and run the machine through at least two full harvest cycles. The tech watches the first ice drop and checks the bin for water. If it is not making ice when we leave, we are not done.
- Replace
- Recharge
- Test
-
Cleanup and walkthrough
We wipe down the area, put the machine back, and show you what we replaced. You get the old part if you want it. We also tell you the one maintenance habit that will keep this from happening again, whether that is a water filter change or a condenser coil cleaning schedule.
- Clean
- Walkthrough
- Tip
Tools and methods we use on every call
Move across a circle, or focus it and press Enter, for an illustrative thermal view of the photograph.
Multimeter
Tests voltage and continuity at the control board, thermostat, and water inlet valve. It tells us whether a part has actually failed before we replace it.
Manifold gauge set
Reads high and low side pressures on the sealed system. We use it to confirm a compressor or refrigerant charge problem on commercial units.
Vacuum pump and refrigerant recovery machine
Required for any sealed-system repair. We recover refrigerant under EPA Section 608, evacuate the lines, and recharge to manufacturer spec.
Leak detector and inspection mirror
Finds water leaks and refrigerant leaks in tight spaces behind and under the machine. The mirror lets us see the back of the bin and the drain line.
Fin comb and coil cleaning pump
Straightens bent condenser fins and pushes cleaning solution through the coil. A clean coil is the difference between a cool-running machine and a strained compressor.
Thermal views are illustrative, generated from the photographs.
Methods
Tube cutter, flaring tool, and torch kit
Lets us cut, flare, and braze copper line sets on site. That means a compressor or drier swap does not turn into a second appointment.
Nut driver set
Opens the panels on Whirlpool, GE, Samsung, LG, Scotsman, Manitowoc, and Hoshizaki machines without stripping screws. Small thing, but it keeps your machine serviceable.
EPA Section 608 sealed-system protocol
Any repair that opens the refrigerant circuit follows recovery, evacuation, and recharge to manufacturer spec. In Naples heat, a system charged without proper evacuation will fail within a year. We do it by the book.
Manufacturer service certification procedures
For Scotsman, Manitowoc, Hoshizaki, and Ice-O-Matic commercial units, we follow the factory diagnostic flow rather than a generic checklist. That means faster diagnosis and the correct part the first time.
Two-cycle harvest test
We never call a job done after one cycle. Two full harvest cycles confirm the machine fills, freezes, releases, and refills correctly. If it fails on the second cycle, we keep working.
Water quality assessment
Naples water is hard, and that scales up ice maker molds and water lines. We check the filter, test fill volume, and recommend a filter schedule based on your water, not a generic six-month guess.
When Naples customers call us
Restaurant no-ice
A Fifth Avenue South restaurant loses its Manitowoc head unit on a Friday night in season.
We treat it as a commercial priority, come out the same evening, and diagnose a failed water inlet valve. We replace it, clean the condenser coil while we are in there, and run the machine through harvest cycles.
Outcome: The bin is full before Saturday brunch. The owner adds a twice-a-year maintenance visit to prevent a repeat during high season.
Condo leak
A Pelican Bay homeowner finds water pooling under a built-in Sub-Zero ice maker.
We pull the unit, trace the leak to a cracked water line tubing, and replace the line and the saddle valve. We check the drain pump and bin seal while the machine is out.
Outcome: The floor is dry, the cabinet is saved, and the machine is making clear ice again. The homeowner gets a filter change reminder for six months out.
Rental route
A North Naples rental property manager has three units with ice makers that stopped producing.
We schedule all three in one trip. One needs a control board, one a clogged water line cleared, and one a thermostat. We stock all three parts and finish the route in a single afternoon.
Outcome: All three units are making ice before the next guest checks in. The manager gets a written log of what was replaced in each unit.
Fridge grinding
A Golden Gate homeowner hears grinding from the fridge ice maker and gets whole cubes on the crush setting.
We diagnose a worn crusher blade and a jammed auger. We replace the blade, clear the auger, and test both cube and crush settings at full speed.
Outcome: The noise is gone and the dispenser works on both settings. The repair costs a fraction of a new refrigerator.
Hotel emergency
A Vanderbilt Beach hotel calls at 5 a.m. because the breakfast bar ice bin is empty.
We dispatch a tech with a recovery machine and common parts. The fault is a failed compressor start relay. We replace it, verify the sealed system, and run the machine through two cycles.
Outcome: Ice is flowing before the breakfast rush. The hotel adds us to its vendor list for emergency calls.
How Ice Machine Repair runs in Naples
Naples is hard on ice machines. The humidity and heat mean a condenser coil that would last a year in a cooler climate can clog in six months here. Beachfront condos in Pelican Bay and Port Royal see salt air that corrodes fittings and water line tubing.
Restaurants on Fifth Avenue South and Third Street South run their machines 18 hours a day in season, which wears out water inlet valves and auger motors faster than the manual predicts. We adjust our maintenance schedule for that reality. If you need a Naples ice machine repair service on a Saturday in February, we are set up for it.
Our trucks carry the parts that fail most in Collier County, so most calls are one visit.
- Pelican Bay: High-rise condos with built-in ice makers. Salt air corrodes fittings, so we check water line tubing and valves on every call here.
- Fifth Avenue South: Restaurant and bar row. Machines run all day in season, so we prioritize commercial calls and recommend quarterly coil cleanings.
- Port Royal: Large homes with Sub-Zero and U-Line built-ins. We handle the sealed-system work these units sometimes need without a second trip.
- Golden Gate: Family homes with freestanding and fridge ice makers. Hard water is the main issue, so filter changes matter more here.
- Vanderbilt Beach: Hotels and condos with heavy ice demand. We schedule commercial maintenance before season starts to avoid breakdowns.
- High humidity and year-round heat: Condenser coils clog faster and compressors run hotter. We clean coils more often and check amp draw to confirm the machine is not straining.
We walk the space and ask what the machine is doing. We protect the floor and pull the unit out. We test the repair and show you what we replaced.
From problem to finished result.
No-ice Manitowoc back in service
Before: A Fifth Avenue South bar had a Manitowoc head unit that stopped producing ice on a Friday. The bin was empty and the display showed an error code. The owner had already bought bagged ice for two nights.
After: We diagnosed a failed water inlet valve and a clogged water line. We replaced the valve, cleared the line, and cleaned the condenser coil. The machine was making ice within 90 minutes and the bin was full by Saturday brunch.
We put the bar on a quarterly coil cleaning and filter schedule. That keeps the valve and line from scaling up again during season.
Leaking Sub-Zero built-in dried out
Before: A Pelican Bay homeowner found water pooling under a built-in Sub-Zero ice maker. The cabinet base was starting to swell and there was a musty smell. The machine was still making ice, so the leak went unnoticed for weeks.
After: We pulled the unit and traced the leak to a cracked water line tubing and a worn saddle valve. We replaced both, checked the drain pump, and dry-tested through two cycles. The floor stayed dry and the cabinet was saved.
We recommended a water filter change every six months and a yearly check of the line and valve. Salt air in the building makes those fittings the first to go.
Grinding fridge ice maker quieted
Before: A Golden Gate homeowner heard grinding from the fridge ice maker and got whole cubes on the crush setting. The dispenser was getting slower and sometimes jammed. The fridge itself was cooling fine.
After: We found a worn crusher blade and a partially jammed auger. We replaced the blade, cleared the auger, and tested both cube and crush settings at full speed. The noise was gone and the dispenser worked like new.
We told the homeowner to run a cup of cubes through the dispenser weekly to keep the auger from seizing. A filter change every six months keeps the ice tasting clean.
Ice machine problems we fix near me in Naples
Most ice machine failures fall into a handful of patterns. We see them every week in Collier County, and we carry the parts to fix the common ones on the first visit.
- No iceIce maker not making iceAn empty bin shuts down a bar or leaves a homeowner buying bagged ice. The longer it runs dry, the more likely a second part fails from the strain. We test the water inlet valve, thermostat, and control board in order. Most no-ice calls trace to a clogged water line or a failed valve. We replace the part, confirm fill volume, and run two harvest cycles before we leave.
- Water leakIce maker leaking waterWater under the machine warps cabinets, grows mold, and can damage flooring. A small leak becomes a big repair if it runs for a week. We trace the leak with an inspection mirror and check the water line tubing, drain pump, and bin seal. Once we find the source, we repair or replace the part and dry-test the machine through a full cycle.
- Noisy operationIce maker noisy operationGrinding and rattling usually mean the auger motor or crusher blade is worn. Ignoring it leads to a jammed auger and a dead dispenser. We isolate the noise, inspect the auger motor and crusher blade, and replace what is worn. Then we test the dispenser at full speed on both cube and crush settings to confirm the fix.
- Error codesIce maker error codesA blinking code stops production and leaves you guessing. Replacing parts at random gets expensive fast. We read the code, test the circuit it points to with a multimeter, and confirm the real fault. You get the correct repair the first time instead of a parts cannon approach that costs more.
- Dirty coilDirty condenser coilIn Naples heat, a clogged coil makes the compressor run hot and long. Ice production drops, the electric bill climbs, and the compressor eventually fails. We clean the coil with a fin comb and coil cleaning pump, then check amp draw to confirm the machine is running cool. We put you on a twice-a-year cleaning schedule so it does not happen again.
Why Naples customers call us first
A working ice machine, a dry floor, and a price you agreed to upfront.
Same-day ice back
Most residential ice maker repair Naples FL calls are finished in one visit. We stock water inlet valves, thermostats, and control boards for Whirlpool, KitchenAid, GE, LG, and Frigidaire. If we need a part we do not carry, we tell you the exact lead time before we leave your driveway.
Commercial uptime protected
A failed ice machine costs a Naples bar or hotel more per hour than the repair itself. We prioritize commercial ice machine repair Naples tickets, bring a vacuum pump and refrigerant recovery machine, and aim to have your bin full before the dinner rush. Weekend and after-hours calls are normal for us.
Leak and noise fixes
Ice maker leaking water or ice maker noisy operation usually means a cracked water line tubing, a worn auger motor, or a dirty condenser coil. We isolate the source with an inspection mirror and leak detector, then repair it. No guessing, no parts cannon.
Honest repair-or-replace call
When a compressor failure or a cracked ice bin makes repair a bad bet, we say so. We price the fix against a replacement in plain numbers. You decide.
What a written scope covers.
What a written scope covers and what shapes it. Prices are set by the business after the first look.
Included
- Full diagnostic of the ice machine
- Failed part and labor to install
- Two harvest cycles before we leave
- Floor protection and cleanup
- Water filter check on every call
- Plain explanation of what failed
Depends on
- Whether the sealed system needs work
- Access to a built-in unit
- Parts availability for your brand
- Condition of the condenser coil
- Water quality and scale buildup
- Whether the machine is residential or commercial
What you receive
Clear records you can keep and share.
Repair log
What failed and what we replaced.
Photo record
Before and after of the failed part.
Filter date
When the next filter change is due.
Maintenance tip
One habit to prevent a repeat call.
Repair or replace: how to decide
The right call depends on the age of the machine, the cost of the repair, and how hard it runs.
Replace
Better when the repair costs too much.
- Compressor failure on old unit
- Cracked bin and mold
- Repeated board failures
Maintain
Keeps a working machine working.
- Filter every six months
- Coil cleaning twice a year
- Descale the mold yearly
What we work with
- Water filter
- Inlet valve
- Thermostat
- Control board
- Auger motor
- Drain pump
- Condenser coil
- Ice bin
Service ZIP codes.
A list like this tells people straight away whether you cover their street. Not listed? Call and ask: it only takes a minute.
- 34103
- 34102
- 34101
- 34105
- 34104
- 34106
Towns we serve.
Based in naples and covering the places around it. Pick one for local details.
- Downtown Naples
- Old Naples
- Park Shore
- Moorings
- Coquina Sands
- Naples Park
- Pelican Bay
- North Naples
- East Naples
- Golden Gate
- Lely Resort
- Naples Manor
What Naples customers say
Frequently Asked Questions
A simple water inlet valve or thermostat swap sits at the low end. Commercial units with refrigerant work cost more because of recovery and recharge time. We quote the full price before we start, so you are never guessing.
We do. IceTech Repair Experts handles residential and commercial ice makers across Collier County, from Old Naples to North Naples. We work on Whirlpool, KitchenAid, GE, Samsung, LG, Sub-Zero, Scotsman, Manitowoc, Hoshizaki, Ice-O-Matic, Frigidaire, and U-Line. Call +12393129157 with your model number and we will tell you what the repair involves.
Yes, in most cases. Same day ice machine repair Naples FL is our standard for calls before 2 p.m. We keep common parts on the truck, so a no-ice or leaking machine is often fixed in one visit. If you call after hours, we will schedule you first thing the next morning or come out that night for commercial emergencies.
The four most common causes we see are a clogged water line, a faulty water inlet valve, a dirty condenser coil, and a defective control board. In Naples, hard water scales up the line and the mold, and the heat loads the condenser. A water filter change every six months and a coil cleaning twice a year prevents most of these failures.
Related Services
Other services from the same team.
- Commercial Ice Maker RepairRestaurants, bars and hotels cannot afford a down cuber. We service high-volume machines, diagnose compressor and refrigerant issues, and carry EPA Section 608 practices on every job.
- Residential Ice Maker RepairHome refrigerators from Whirlpool, GE, Samsung and LG make up most of our residential calls. Common fixes include clogged water lines, faulty inlet valves and worn auger motors. We arrive with the parts on the truck and test ice production before we leave your kitchen.
- Refrigerator Ice Maker RepairWhen the ice maker inside your fridge stops, the cause is often a frozen fill tube or a bad thermostat. We thaw the line, test the valve and check the control board. Most refrigerator ice maker repairs in naples finish within two hours.
Need Ice Machine Repair Naples FL today?
Call +12393129157 and talk to a tech, not a call center. We serve homes and businesses across Collier County with upfront pricing and same-day availability on most calls. If your machine is down, we will tell you what it takes to get ice back.
Contact IceTech Repair Experts
Call +12393129157 or email [email protected] to book your ice maker repair. Our dispatch team answers calls from 8 a.m. to 6 p.m. Tell us your brand, symptom and ZIP code, and we will give you a realistic arrival window.